Tel: +44(0)1932 882214 or
+44(0)1932 506134

2015 Mazak Hyper Quadrex 150 MSY, used Turning Centres

Click to enlarge

Description

2-turret/2-spindle CNC turning center

 

Mazatrol Matrix 2

CAPACITY

Chuck size 6.0 "

Maximum swing (upper turret) 320 mm

Maximum swing (lower turret) 270 mm

Standard machining diameter 242 mm

Maximum machining diameter (upper turret) 300 mm

Maximum machining diameter (lower turret) 170 mm

Maximum support weight (1st spindle) 200 kgf

Maximum support weight (2nd spindle) 150 kgf

Maximum bar size diameter 65 mm

SPINDLE

Rotating speed maximum (1st spindle) 5000 min-¹

Rotating speed maximum (2nd spindle) 6000 min-¹

Rotating speed minimum (1st spindle) 35 min-¹

Rotating speed minimum (2nd spindle) 35 min-¹

Acceleration (1st spindle) 2.70 s

Acceleration (2nd spindle) 3.80 s

Spindle nose (1st spindle) A2-6"

Spindle nose (2nd spindle) A2-5"

Spindle through hole diameter (1st spindle) 76 mm

Spindle through hole diameter (2nd spindle) 61 mm

Motor output (30 minute rating) 1st spindle 15.0 kW

Motor output (30 minute rating) 2nd spindle 11.0 kW

Motor output (continuous rating) 1st spindle 11.0 kW

Motor output (continuous rating) 2nd spindle 7.5 kW

UPPER TURRET

No of tools 12

Tool size (OD turning) 20 mm

Tool size (ID turning) 32 mm

Indexing time (single step) 0.20 s

Indexing time (full turn) 0.6 s

Mill spindle rotating speed maximum 6000 min-¹

Mill spindle rotating speed minimum 35 min-¹

Mill spindle output (10 minute rating) 5.5 kW

LOWER TURRET

Number of tools 12

Tool size (OD turning) 20 mm

Tool size (ID turning) 32 mm

Indexing time (single step) 0.20 s

Indexing time (full turn) 0.60 s

Mill spindle rotating speed maximum 6000 min-¹

Mill spindle rotating speed minium 35 min-¹

Mill spindle output (10 minute rating) 5.5 kW

FEED AXES

Travel X1 axis 175 mm

Travel X axis (lower) 111 mm

Travel Z1 axis 520 mm

Travel Z2 axis 580 mm

Rapid traverse (upper) X 30 m/min

Rapid traverse (upper) Y 26 m/min

Rapid traverse (upper) Z 40 m/min

Rapid traverse (lower) X 24 m/min

Rapid traverse (lower) Y 20 m/min

Rapid traverse (lower) Z 40 m/min

OTHERS

Coolant tank capacity (total) 205 L

Power requirement (30 minute rating) 50.2 kVA

Power requirement (continuous) 39.4 kVA

ADDITIONAL EQUIPMENT

SECOND SPINDLE C AXIS

2nd spindle C axis 0.0001º increments

HIGH POWER/PRESSURE COOLANT

High power coolant (5 bar x 2)

FACTORY AUTOMATION SYSTEMS

Workpiece unloader & conveyor

WORK FEEDING SYSTEMS

UKBF070 Hydrafeed Multiservo 3-80 short magazine bar feed

CHUCKS (MAIN SPINDLE)

Kitagawa 6" chuck & cylinder (1st)

Kitagawa 6" chuck & cylinder (2nd)

CHIP CONVEYORS

Chip conveyor (hinge) including chip bucket

NC CONTROLLER

Cylindrical and polar co-ordinate 

Enquire about the:
2015 Mazak Hyper Quadrex 150 MSY

Fields marked with * are mandatory

Code Image - Please contact webmaster if you have problems seeing this image code Load New Code

Please enter the security code from the image above